Key takeaways
- The best square filter holder kits for landscape photography compared: 100mm systems with CPL and ND glass, plus a budget Cokin P starter kit.
Screw-in filters work well enough for a single effect, but landscape photography quickly outgrows them. A square filter holder system lets you slide a graduated ND filter up or down until its transition sits exactly on the horizon, stack a solid ND on top of a polarizer, and move the whole setup between lenses with nothing more than a cheap adapter ring. Once you own the holder, every lens you buy only needs a ring, not a new set of filters.
As an Amazon Associate, we earn from qualifying purchases.
The kits below cover the main ways into the format. Three are complete 100mm systems that bundle a holder with filters and rings, one is a smaller Cokin P format starter bundle for smaller lenses, and the last is a 100x150mm ND filter set for photographers who already own a 100mm holder and want to fill it. All of them use the widely supported 100mm or 84mm filter standards, so the glass you buy today keeps working if you change holders later.
Disclosure: this article contains affiliate links, and if you buy through them we may earn a commission at no additional cost to you.
Our top picks
1. K&F Concept X PRO Square Filter Holder System Kit
The X PRO kit is the most complete starting point in this roundup. Alongside the metal holder you get a 95mm circular polarizer that mounts behind the square filters, plus three square ND filters covering the densities landscape shooters use most: ND8 for smoothing water in soft light, ND64 for golden hour, and ND1000 for long exposures in full daylight. A cap closes over the rear of the holder when the polarizer is removed, which keeps stray light out during long exposures.
The filters are optical glass with a 36-layer nano coating that sheds water and resists fingerprints, and they arrive pre-fitted in the frames this holder design requires. Four adapter rings cover the common wide-angle thread sizes, so most landscape lenses work straight out of the box.
Specs:
– Filter system: 100mm square (X-PRO series)
– Holder: metal, with rear CPL mount and light-sealing cover
– Filters included: 95mm CPL, square ND8 (3-stop), ND64 (6-stop), ND1000 (10-stop)
– Coating: 36-layer nano coating, waterproof
– Adapter rings: 67mm, 72mm, 77mm, 82mm
– Kit weight: about 2.03 lb
ASIN: B09MQ39SQ7 · View on Amazon
2. NiSi V6 100mm Filter Holder Kit with Enhanced Landscape CPL
The V6 is the holder-only route into a premium 100mm system: you bring your own square filters, and NiSi supplies a CNC-machined aviation-grade aluminum holder with three slots for 100mm wide, 2mm thick filters. Its party trick is the included 86mm Enhanced Landscape CPL, an ultra-slim polarizer that sits in the holder base and rotates via small wheels on either side, so you can dial in polarization without disturbing the filters stacked in front of it.
NiSi rates the V6 for use on full-frame lenses as wide as 16mm without vignetting, which makes it a strong pick for ultra-wide landscape work. The kit includes the main 82mm adapter and step-up rings for 67mm, 72mm and 77mm lenses, plus a lens cap that protects the front element while the adapter stays mounted.
Specs:
– Filter system: 100mm square, 2mm thick filters
– Holder: CNC-machined aluminum, three filter slots plus CPL
– Polarizer: 86mm Enhanced Landscape CPL, gear-wheel rotation
– Adapter rings: 67mm, 72mm, 77mm, 82mm main adapter
– Wide-angle use: no vignetting at 16mm on full frame
– Also included: lens cap
ASIN: B07PWYC7X9 · View on Amazon
3. NEEWER Square ND1000 Filter Kit with Holder
If your main goal is long-exposure work and you want one filter that does the heavy lifting, this NEEWER kit is built around a single 100x100mm ND1000 glass filter. Ten stops of neutral density turn bright midday scenes into multi-second exposures, smoothing water and stretching clouds, and the 2mm optical glass carries multi-resistant nano coatings that repel water, oil and scratches.
The metal holder clamps onto the adapter ring and offers two filter slots with a light-leak gasket on the inner side, so you can add a graduated filter later as your kit grows. Eight adapter rings cover nearly every lens thread from 49mm to 82mm, and everything packs into the included semi-hard case with a cleaning cloth.
Specs:
– Filter system: 100mm square
– Filter included: ND1000 (10-stop), 100x100mm optical glass, 2mm thick
– Coating: multi-layer nano coating, water, oil and scratch resistant
– Holder: metal, two slots, inner light-leak gasket
– Adapter rings: 49mm, 52mm, 58mm, 62mm, 67mm, 72mm, 77mm, 82mm
– Also included: semi-hard storage case, cleaning cloth
ASIN: B0B1L49ZWT · View on Amazon
4. Andoer 13-Piece Square Filter Kit for Cokin P Series
This Andoer bundle is the low-cost way to learn how square filters work before committing to a glass 100mm system. It follows the long-established Cokin P format, whose 84mm wide filters suit smaller mirrorless and DSLR lenses, and it arrives with thirteen resin filters: seven graduated colors, three graduated ND filters and three full ND filters, so you can experiment with stacking and grad positioning straight away.
The plastic holder and five aluminum adapter rings cover lens threads from 52mm to 72mm, and the filters store in the included bags. Resin filters are less scratch resistant than glass and the densities top out at three stops, but as a learning kit or a lightweight travel set it covers a lot of ground.
Specs:
– Filter system: Cokin P series, 84mm wide filters
– Filters included: 13 resin filters (7 graduated color, graduated ND2, ND4, ND8, full ND2, ND4, ND8)
– Holder: plastic, Cokin P standard
– Adapter rings: 52mm, 58mm, 62mm, 67mm, 72mm
– Also included: storage bags, cleaning cloth
ASIN: B01HEX3LEC · View on Amazon
5. SIOTI Square Filter Kit 100x150mm ND2, ND4, ND8 and ND16
The SIOTI set is the odd one out in this list because it is a filter set rather than a holder bundle, and it earns its place for photographers who already own a 100mm holder. You get four solid ND filters in the larger 100x150mm (4×6 inch) format, covering one to four stops: ND2, ND4, ND8 and ND16. That gentle range is ideal for video shooters and for landscapes in soft light, where a heavy ten-stop filter would push shutter speeds too far.
The 100x150mm size fits Cokin Z-Pro, LEE, Hitech and SIOTI 100mm holders, and the taller panel leaves room to offset the filter in the holder when you want to fine-tune the effect. Note that no holder or adapter rings are included, so budget for a holder if you do not already have one.
Specs:
– Filter size: 100x150mm (4×6 inch)
– Filters included: ND2 (1-stop), ND4 (2-stop), ND8 (3-stop), ND16 (4-stop)
– Holder compatibility: Cokin Z-Pro, LEE, Hitech and SIOTI 100mm holders
– Holder and adapter rings: not included
ASIN: B076BMVMCP · View on Amazon
How to Choose a Square Filter Holder Kit
Start with the filter size. The 100mm standard is the landscape default: filters are big enough for full-frame wide angles, and every major brand makes glass for it. The smaller 84mm Cokin P format suits smaller lenses and lighter travel kits, while 150mm systems exist for extreme wide angles and lenses with no front thread.
Check wide-angle clearance. A thick holder or a standard polarizer can vignette on lenses wider than about 24mm. If you shoot at 16mm on full frame, look for a slim holder, an oversized rear-mounted CPL and a maker who states a tested focal length, like the NiSi V6 above.
Decide how the polarizer is handled. Holders with a built-in or rear-mounted CPL that rotates independently, such as the K&F X PRO and NiSi V6, are far easier to use with grads in place than designs that need a screw-in polarizer in front of the holder.
Count your adapter rings. One holder serves every lens you own if the kit includes rings for each thread size. Kits with four to eight rings, like the K&F and NEEWER sets here, usually cover a whole bag without extra purchases.
Glass beats resin as you progress. Resin filters keep starter kits affordable and are fine for learning, but glass resists scratches better, sits flatter in the holder and usually carries better coatings. Whichever material you choose, standard 2mm thickness keeps filters interchangeable between brands.
Think about light sealing for long exposures. Ten-stop work in daylight punishes gaps between stacked filters. Holders with gaskets, close-fitting slots or a rear cover produce cleaner results than loose-fitting budget holders.
Conclusion
For most landscape photographers, the K&F Concept X PRO is the easiest recommendation: holder, polarizer and the three most useful ND densities in one box. The NiSi V6 suits shooters who already own 100mm glass or want the best wide-angle CPL handling, while the NEEWER kit is a focused long-exposure starter with the widest ring coverage here. The Andoer bundle keeps the Cokin P learning curve cheap, and the SIOTI set fills out an existing Z-Pro style holder with a useful run of lighter ND densities. Pick the system that matches your widest lens and the way you like to handle a polarizer, and it will serve every lens you add later.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountAs an Amazon Associate we earn from qualifying purchases.
Write Your Review
No reviews yet. Be the first to share your experience!